Skip to main content

A "Bike" Wash

Image
By
This past spring after the Upper Peninsula Early Childhood Conference, I was given a wonderful book: Do-It-Yourself Early Learning by Jeff and Tasha Johnson. This book is fantastic! There are plans and suggestions for a variety of toys and activities that you can make yourself with very inexpensive materials.

One of my favorite suggestion is to make a pvc pipe construction set. The book outlines various sizes of pipe to cut and a number of different types of connectors. Today, we used some of our set to make "A Bike Wash" (A similar suggestion for a car wash is outlined in the book. However, we did not opt to buy a different size pvc pipe for our version.) The children had a fantastic time cooling off and tinkering with the pipes.

"What happens when you put your finger over the hole?"


I'm fairly certain that the bikes only went through the wash once or twice....

The weather has been quite warm, and it was just as much fun to play with the "bike wash" without any bikes.

"I'm thirsty.... wonder how the water tastes?"




The PVC pipe set is a HUGE hit!!! We've been building shapes, letters, and all kinds of crazy contraptions!




If you don't already have a set. PVC pipe is extremely inexpensive at a do-it-yourself/hardware store. (I bought 10' lengths for less than $1.00). The connectors are a little bit more expensive, but still very reasonable, and the pipe cutter cost around $5. We have a wonderful set with endless opportunities for less than $30. Don't forget to look into some furniture grade piece connectors too- the regular plumbing section won't have the 3, 4, and 5 way connectors you will need in order to build more in 3-dimensions. Those connectors are not necessary, but definitely worth it in my opinion!

Some of you have asked, "How do you connect that to the hose???" it is quite simple. We purchased a brass fitting that connects to the hose! (It costs us around $3.50). You need to make sure that you have a pvc pipe connector that works with the hose adapter. We have a male threaded end connected to a female/female brass adapter. Depending on the size of pvc pipe you opt to use, (we used 1/2 "), you will have to use a different type of adapter and connectors. Your local hardware/do-it-yourself store employees in the plumbing area will be able to assist you in finding exactly what you need. In terms of the car/bike wash.... We randomly drilled holes in the pipes to make it work. Keep in mind as you are adding holes, the more you have, the less pressure there will be to force the water out of them. Happy Building!!!!
Labels:

Comments

Scott said…
My kids love building with PVC pipe. We haven't had a bike wash, though. And they are always asking for water to pour through the pipes....
August 31, 2010 at 7:13 PM
Anonymous said…
This looks amazing. My daughter would LOVE this. Not very handy but I might be able to manage that. Might have to print off your post and take that with me to the store!
August 31, 2010 at 9:27 PM
Jazz said…
Simple but still awesome and very effective! Thanks for sharing. I am hoping to start a collection of PVC pipes and fittings(connectors) as well. And I'm so glad you pointed out the part about make too many holes! I learned that very quickly when I made ours.
May 30, 2011 at 11:56 PM
Post a Comment

Popular posts from this blog

A Few Ideas With Marker Caps (As Promised)

By
Yesterday, I hope I convinced you not to throw away your markers that "don't work." Today, I will share with you a few ideas for what to do with all of the caps. The possibilities are nearly endless, but here are a few of our recent creations: 1) A Leprechaun/Fairy Ladder/Rope Ladder: 2) #1 if not permanently secured can also double as a rope bridge: 3) #1/#2 can also be made into a train track for your homemade trains :). (No photo available) 4) You can use them as beads for a necklace: 5) You could make them into a wind chime. (No photo available). 6. You can use them as small manipulatives to count, sort, and make patterns with. (No photo available). 7) You could use them as playing pieces in your own homemade board game. (No photo available). 8) You could put them on a wire and glue them in place to make a twirling whirly-gig. 9) You could top them with a lid from a milk jug to make tiny tables or toadstools. 10) You could make them...
15 comments
Read more

Our DIY Light Tables

By
There has been a lot of buzz about light tables over at Teach Preschool on Facebook . Deborah has collected some great ideas for light table play and has been experimenting with making her own table over on the Teach Preschool blog.   I thought I would share with you our two light tables and how we made them. This first table is one that we put together with some scrap wood pieces, an old plexi-glass door from an entertainment center, and a couple of aquarium lights. Total Cost = $0. (We had everything on hand.)  The table needs a little bit of tweaking. (It is on my to do list).  Basically, we made a frame of wood around the plexi-glass and placed the lights under it. Our DIY skills in putting this together were far from expert, so the frame has a couple of gaps (and the reused wood is warped). We plan to try a new frame and use some caulk to seal any gaps.  We also plan to attach the lights to the side of the frame instead of just placing them on the f...
15 comments
Read more

"The Markers Don't Work!"

By
How may times have you heard, "Ms. (fill your name in here), this marker doesn't work!" I know I hear it all the time. Sometimes it is because our little friends forget to replace the caps, and sometimes the markers have just been "all used up!" What do you do with all those markers that just don't work? Please don't tell me that you throw them out, try this instead: First, sort your markers out. Put the caps in one container ( save those too, I'll show you what you can do with them in tomorrow's post) and the markers in another. I have a box for the markers that "don't work" for the children to place them into every time they run across one. You can also have the children help you test the markers periodically to sort out the ones that need to be removed from the "working set." When it comes time to use "the markers that don't work," we use a small sponge paint roller to roll water onto our card...
16 comments
Read more